Usb Rechargeable Curling Iron,Multi-Function Curling Iron,Durable Rechargeable Curling Iron,Wireless Usb Rechargeable Curling Iron Pingyang Ruiqiang Home Appliances Factory , https://www.iiyocares.com
(2) Check whether the mechanical parts (such as saw blades, table tops, screws, belts, motors, switches, etc.) are normal before work. If it is found that the problem should be immediately parked, report the team leader to repair, eliminate the malfunction before driving.
(3) When the machine is running, it is forbidden to repair or adjust each part, and if necessary, it can be stopped. Concentrate on your work and do not chat or laugh.
(4) When sawing wood, it must keep close to the mountain.
(5) Observe the presence of obstacles or obstacles near the saw blade each time you drive. When you are absolutely correct, you must drive.
(6) When sawing wood, the height of the saw blade protruding from the table is 3 mm smaller than the thickness of the wood. Keep the saw blade flat, sawtooth sharp, and have proper sawing.
(7) The operator is not allowed to go straight to the saw blade and must rely on one side of the operation, and should always supervise others not to stand in a straight line position on the saw blade.
(8) When sawing timber, it is necessary to use more backings and saws. It is strictly forbidden to use saws to cut wood with knots and timber with a length of less than 40 cm.
(9) When the machine is running, it is forbidden to approach the saw blade by hand or to work across the saw blade.
(10) It is necessary to pay attention to keeping the protective cover of the sawing machine completed and can not be arbitrarily changed without the approval of the leaders.
(11) The operator must be assigned by the team leader and it is strictly forbidden to disturb the machine without being assigned.
(12) At the end of the work, the sawdust on the machine surface and on the ground should be cleaned up, and the problems found in the work should be promptly reported to the team leader and the handover work should be completed.
Sawing work safety responsibilities
(1) Wear all protective equipment before work. Cuffs, clothing, and trousers should be tightly fastened. Women workers must wear hats and gloves. The work around the machine is clean and tidy.