1) Reading in other formats When converting files from other formats to V5, it is best to first perform the import of options. supplement: CATIA V5 -> DXF 2 Ton Electric Stacker With High Mast
Electric Stacker, or walkie stacker, is an
industrial device for loading and lifting pallets on a shelf at high level. The electric stacker with high mast can be widely used
in petroleum, chemical, pharmaceutical, textile, pigment, coal and other industries,
as well as ports, railways, freight yards, warehouses.
Compared with the traditional manual stacking,
Zowell full electric stacker maintains great advantages in safety, efficiency
and cost. In addition to durability and accuracy both outside and inside,
Zowell XE electric stackers are also equipped with mast with clear view, double
speed and lateral vertical moving switch, which are valuable when working in
limited space.
The load capacity of XEH20A is 2000kg, it has two driving modes: walking and standing driving. If
you need bigger capacity or other customized options such as rod, low mast,
grabbling frame, please contact us so that we can provide you best solution
with professional knowledge.
Suzhou
Pioneer Material Handling Equipment & Technology Co., LTD was established
in 2005. The factory is located in Suzhou Wuzhong district, Xujiang industrial
park.Zowell is the English trademark and its Chinese trademark is pronounced
zhuoyi. The company is a national high-tech enterprise which has been awarded
the the title of national intellectual property superiority enterprise and it
has its own Suzhou engineering technology research and development center.
High mast electric stacker,Baoli electric stacker,Battery for electric stacker,Best electric pallet stacker,Best electric stacker Suzhou Pioneer Material Handling Equipment & Technology Co., Ltd , https://www.xianfengforklift.com
2) Save to other formats
When V5 is saved in other formats, the export setting of option must be performed first.
3) V5 -> V5
V5 is backwards compatible, high version V5 can read low specimen v5 files, but in turn lower versions may not be able to read higher versions of files (because of the enhanced functionality leading to increased data structures)
V5 document -> save format (CATPart) -> STEP(stp), IGES(igs), (model)
(CATProduct)-> STEP(stp), IGES(igs), (session)
(CATDrawing)-〉 AutoCAD (dwg), DXF (dxf), IGES (ig2)
Catia -> IGES
Export note
1) Expression mode
Surface:
The SOLID of the original model was converted to IGES face but the wireframe could not be generated
Wire frame:
Only solid edges can be transformed. Only useful when dealing with curves
2) Representation/Non-Representation This setting allows you to limit the saved objects to the indicated range
Import point tolerance setting: Start with the tolerance of the small point
n When selecting the combination mode, note that the IGES model is a separate part
n When dealing with multiple parts in a single IGES model, note that each part must meet the element number 402 in IGES
After the import is done, the following two log files will be generated. The path is set in the CATReport system parameter, a, report.rpt b. error.err
--- Data exchange settings between CATIA V5 (CATDrawing) and Auto CAD (DXF/DWG)
1) import settings
* Unit setting: When the DXF/DWG file is opened, the units are mm, cm, m, inch, and feel, and the displayed scale can also be changed.
When the DXF/DWG map is displayed in CATIA at 2 times magnification, set it to 2:1
* File transfer destination
Drafting mode / background mode
When logged in as background mode, it can be shared by multiple drawing shares
* Space composition
Model space / paper space / both
* Line mapping
* DXF size import configuration
CATIA size + detail --- read in CATIA size
Detail ---- Not a CATIA size, treated as a detail.
Shape ---- Single Shape
2) export save settings
* Output all sheets
All sheets that contain multiple sheet designs export or only output the current sheet.
* DXF/DWG export form
DXF/DWG Ver12, 13, 14 or Autocad2000.
CATIAV5 data exchange