EVA Faux Teak Sheet comes in double layers EVA material, it appears grooves to show the bottom color after the roller cutting, which makes it looks like a teak wood. So instead of using a real wood for the boat flooring, more and more people put their focus on this no maintain and Eco-friendly EVA marine sheet.
Made from marine grade UV resistant, closed cell, high density EVA foam material, it stands perfectly even in a strong sunlight area. And the EVA foam material makes it softer and more comfortable for people standing there bare feet than real teak or PVC teak. Some would concerned if the boat mat would be not durable to use since it is made from foam material. Well, it may not hard like real teak or PVC teak, and compete the durability with those two, but with a higher density EVA foam, we are able to compete with other suppliers who try to compromise the density to reach to a lower price.
The sheet comes in 230cm x 90cm or 250cm x 120cm, user can cut the sheets into size to fit the shape of boat decking, then just peel and stick since the sheets we offer is with 3M adhesive on the backing. It can be applied on boat decking of course, and other like swim platform pad, helm station pad or simple seat pad.
What's more, this kind of sheets can be applied in recreation vehicle for luxury flooring, a safe traction mat for the edge of swimming pool, a beautiful looking for flooring in room or balcony.
Eva Faux Teak Sheet,Faux Teak Sheet,Foam Faux Teak Sheet,Faux Teak Strip,Faux Teak Edging,Eva Faux Teak Deck Sheet Huizhou City Melors Plastic Products Co., Limited , https://www.foamexpert.net
Â
Name:
Pneumatic Rubber Fender
Standard
ISO 17357
Inner pressure
 50KPA 80KPA other can be supplied as required
Type
sling type defense type chain-net type
Certification
IACS KR LR BV NK ABS DNV CCS...
Function
ship to ship
Surface
Black painted or as required
Material
Natural Rubber
Diameter
0.5~4.5M
Length
1.0M~9.0M
Pneumatic Rubber Fender
(1) High energy absorption
The amount of energy absorbed is the main technical performance indicators fender instruments. With the ship's tonnage growth, berthing operations, ship collision energy contact quay or other ships also doubled. Huge collision energy must rely on the contact area on the fender and enough to absorb sufficient deformation. Aohai rubber ship fender use compressed air as the buffer medium to absorb ship impact energy and have good elasticity.
(2) Ultra low back pressure
The inside air of pneumatic fenders is low pressure gas, the internal pressure increase is very limited during compression deformation. Due to the large contact area, unit pressure acting on the ship hull surface is very low, compared with other fender instruments, is not the common low back pressure.
(3) Inclined contact, good adaptability
Ship must have certain angle which have the possibility of contacting the side of the shore. As the inclined interface of sea inflatable fender, its adaptability is much higher than other fender.
(4)Floating performance is good, not subject to tidal influence, fender can be maintained in the ideal level
Pneumatic fenders floating on the water surface (more than 50% of the volume), along with the change of position is not relative to the tidal fluctuation. Especially the ship as the waves rolling, cylindrical inflatable fenders with rolling, the friction force is very small. So it will not damage the coating surface of the hull, and also decrease the moving.
(5) Both end fender flange produced by special materials, acid and alkali resistance, oxidation resistance, not easy to rust.
Â
Fender performance specification Â
Â
SizeÂ
Initial internal pressure
Guaranteed energy absorption
                 GEA(kJ)Reaction force at GEA deflection
                       R((kN))
D×L(m)
(Kpa)
Minimum value at deflection
60±5%Tolerance ±10%
0.5×1.0
50
6
64
0.6×1.0
50
8
74
0.7×1.5
50
17
137
1.0×1.5
50
32
182
1.0×2.0
50
45
257
1.2×2.0
50
63
297
1.35×2.5
50
102
427
1.5×3.0
50
153
597
1.7×3.0
50
191
639
2.0×3.5
50
308
875
2.5×4.0
50
663
1381
2.5×5.5
50
943
2019
3.0×5.0
50
1210
2104
3.0×6.0
50
1485
2583
3.3×4.5
50
1175
1884
3.3×6.0
50
1675
2783
3.3×6.5
50
1814
3015
3.3×10.6
50
3067
5257
4.5×9.0
50
4752
5747
4.5×12.0
50
6473
7984
About Us
Aohai Marine Fittings Co., Ltd belong to Aoahai Group, is invested by Aohai Anchor Chain Factory, total investment is over $180 million. We supply products for Offshore Project, Quay Construction and Shipbuilding Industry. We currently have more than 600 stuff, including 75 engineers and management, 25 international trade personal, 19 QA engineers.
Our main production equipment include 5# , 7#, 9#, 11# chain manufacturing machine,
automation anchor manufacturing machine,
steel mooring buoy manufacturing production line,
3 sets of rubber fender production line, heat treatment machine,
load test machine and shot blasting machine.
Meanwhile, we are sales representative of other big factories, products mainly include Pneumatic Rubber Fenders, Marine Mooring Ropes, Deck Out-fittings and Steel Wire Ropes.
We are ISO9001 Quality Control System approval, and approved by ABS, BV, LR, DNV, GL, NK, KR, CCS, RINA and other IACS class societies.
Any inquiry please contact:
Kelly
Mobile: +86-17753210369
Â
Â
Â
Website: www. anchorchaincn.com /Â www.aohaimarine.com
Â
Certificate Yokohama Pneumatic Rubber Fender
Model NO.: pneumatic fender
Length: From1m to 12m
Part: Fender, Bumper
Service Life: 10-20years
Certification: BV, ISO9001, CCS, ISO17357, ABS, Dnv, Lr
Engine Type: Outboard
Capability: Water Rubber Hose
Load Capacity: >8000teu
Usage: Trade, Ship Launching, Protection, Ship Docking
Trademark: AOHAI RMS WHALE
Transport Package: According to Customer Request
Specification: see attached
Origin: China
HS Code: 40169400
Yokohama Pneumatic Rubber Fender with Certification