Compared with similar products at home and abroad, this series of equipment has significant technical advantages, which are mainly reflected in:
1. High gold desorption rate: the carbon-poor gold grade after desorption is less than or equal to 50g/t (the same industry products are generally less than or equal to 100g/t).
2. High primary electrolysis rate: the average electrolysis rate of desorption solution is ≥90%. (The products in the same industry are generally around 70%).
3. Accurate gold balance: the actual amount of gold obtained after desorption and electrolysis is consistent with the theoretical gold content in the gold-loaded carbon. (Products in the same industry generally have the phenomenon of "floating gold or accumulative funds", which causes the loss of gold in the processing process and makes the amount of gold unbalanced)
4. Efficient and easy to operate: The whole set of equipment adopts integrated design, signal acquisition, operation adjustment control and safety protection are automated to ensure high efficiency, easy operation, safety and reliability during the entire operation period.
5. Low operating cost: The equipment is made of real materials of special materials (mainly including high-quality insulation materials, all-tetrafluoroethylene insulation materials, fully imported aerospace-grade circulating pumps, high-resistance electric shock heating pipes, etc.). The power-consuming equipment adopts frequency conversion design to ensure the low cost of operation and maintenance while ensuring the desorption electrolysis index.
Carbon Desorption1,Electrolytic Refining Of Gold,Gold Mining Machine,Extraction Of Gold,Electrowinning For Gold Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com
Hydraulic Crimping Machine/Curving Roof Roll Forming Machine
Place of origin: Hebei,China (Mainland)
Type: Tile Roll Forming Machine
Port: Tianjin
Payment terms: T/T L/C
Minimum order quantity: 1 set
Control system: PLC
Life time: 10 years
A.Technical specification
1.Process flow:
  Processes: Manual de-coiler-Roll forming machine-PLC system-Hydraulic  system-Cutter
2.Technical Parameters
  1).Shaft material: 45# steel, tempering; shaft diameter: 80 mm
  2).Roller material: 45# steel, forging and hard chromium plating
  3).Roller station: 3 stands
  4).Main motor power: 3kw
  5).Main frame: 350mm H steel
  6).Wall thickness of the main forming machine: 20mm steel plate
  7).Thickness of the plate: 0.2-1.2mm
  8).Chromium plated roller surface: 0.05mm
  9).Voltage: 380v 50hz 3-phase
10).Transmission chain is: 1".
B. Sales terms
1).Terms of Payment: 30% of the total contract value paid by T/T as down payment, the rest 70% of the total contract value to be paid by T/T after inspection by buyer in seller's factory while before delivery.   Â
               Â
2).Delivery: 30 days after receipt of advance payment
3).Warranty:12 months limited warranty
During warrant y: if some parts are broken and because of the quality of the parts in one year, we give the buyer a new one and pay for the shipping fee. If some parts are broken because of the wrong operation of the workers, the buyer will buy it by himself.
C. Attention.
1). How to visit your company?
a.Fly to Beijing airport: By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can pick up you.
b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi (4.5 hours), then we can pick up you.
2). How to get a quotation?
a.Give me the profile drawing and thickness,this is the important.
b.Other specific requirements are welcome, such as the speed, power and voltage you want.
3). What can you do if the machine broken?
Our machine's warranty period is 12months! If the broken parts can't repair, we can send the new parts replace the broken parts free, but you need pay the express cost yourself. If after warranty period, we can through negotiation for to solve the problems, and we supply the technical support for the whole life of the equipment.
4). Can you be responsible for transport?
Yes,please tell me the destination port or address.We have rich experience in transport.
5). How long the machine could be made?
Normally speaking, common roof profile making machine could be made within 45 working days. If you need machines in a hurry, we can make it for you less than a month.
China-Hydraulic-Crimping-Machine-Curving-Roof-Roll-Forming-Machine
Cangzhou All Service Machinery Equipment Co., Ltd, is a professional manufacturer and exporter, specializing in designing, manufacturing, developing, sales and services in roll forming machine. We are located in Botou city, Hebei, near Beijing, with convenient transportation access .We have been establishing and keeping good business relationship with more than 70 countries of worthy clients all over the world, mainly locating in East Europe, Middle East, South and West Asia, Africa and South America.