Name: Stainless Steel 304 Sanitary Centrifugal Pump
1. Spec: 3T-180T, 0.55KW-75KW
2. Material: SUS304 SUS316L, the pump body, pump cover and impeller contact with medium made of SUS316L, SUS304.
3. Standards: DIN, SMS
4. Impeller: Open type impeller, there is no dead end.
5. Operate condition: Health centrifugal pump is a few horizontal transport of high and low level, is not the Self-priming type.
6. Surface treatment: The part contact with mdedium is polished, and other partisglass painted and sand Blasted
7. Max inlet pressure: 0.5MPa
8. Temperature range: -10 to Degree +140Degree (EPDM)
9. Flushed shaft mechanical sealing:
Water pressure: Max 0.1MPa
Water lift: 0.25-0.5L/min
UnRegistered
Motor:
I. Configuration of "ABB" brand three-phase AC motor is in accordance with the International Electrotechnical Commission IEC60034. IEC60072 standard design comply with European "CE" Marking requirements
II. The explosion-proof motor also available, that can meet with the requirement of different applications.
III. It with excellent electric performance, and with low niose, low vibration, the protection grade is IP55, insulation grade is F.
4. Operate involtage:
≤ 3Kw, 220-240V/380-420V, /Y
>3Kw, 380-420V/660-690V, /Y
5. Requency: 50Hz/60Hz
6. Working method: Continuous(SI)
7. Rotate speed: The standard rotate speed is 2900r/min
Stainless Steel 304 Sanitary Centrifugal Pump