Secondary Bending Forming Stamping for Medical Equipment

Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm
Customized: Customized
Lead Time: 30 Days
Tolerance: +/- 0.002
Origin: China
Process: Separation Process
Industry: Metal Stamping Parts
Tolerances: 0.02mm
Customized: Customized
Lead Time: 30 Days
Tolerance: +/- 0.002
Origin: China
Application:

Medical equipment wire harness terminals.

Secondary Bending Forming Stamping for Medical Equipment

Caracteristics:
 
Material Becu
Material Thickness 0.08mm (.003″)
Type Female
Plating Plated on both sides
Plating thickness 10u"
Pitch 1.6mm
Stamping Speed 300SPM
Dimension Tolerence +/-0.01mm

-High level of precision tooling processing, cutting oil required, PG, JG high- precision machining equipment.
- Product with two sets of dies, blanking completed in two steps.
- Product after punching the first surface, The first face punching products, in order to product efficiency , the need to strip after punching a specified area on both sides were plated ( film coated ), gold-plated and then bending forming , to prevent bending when the terminal is part abrasions, All punching and bending parts oil to be special treatment.

Company Profile:

Dongguan Huisoelec Limited excels at high-volume production of tight-tolerance precision metal stamping. Through proven manufacturing processes and industry-leading technology, we are able to create innovative solutions for your most complex component needs. Our precision stamping begins with high quality progressive dies.

All of our presses are equipped with electronic sensors, allowing us to run production consistently and safely at maximum speeds with minimum downtime.

Straight-sided presses ranging from 25 - 260 tons, imported from Taiwan and Japan, equipped with precision feeders, are capable of running speeds from 60 - 1500 spm. Dimension tolerence can be controled within +/-0.007mm, blanking thickness ranges from 0.04mm to 3.2mm; Piloting hole is φ0.08 min.

Yamada Dubby presses ranging up to 30 tons; ideal for coining difficult, tightly toleranced components in materials such as stainless steel, low-carbon steel, and copper alloys.  Parts may be ordered unplated, preplated, or postplated, packaged in bulk or on reels. Part quality strictly controled by our experienced QC staffs.

Not sure your products requirements? Directly send us all the information you know(CAD/3D drawing/Solid picture), the engineer team will provide the best solutions. Contact us now!

 

www.huisoelec.com Application:

Medical equipment wire harness terminals.

Secondary Bending Forming Stamping for Medical Equipment

Caracteristics:
 
Material Becu
Material Thickness 0.08mm (.003″)
Type Female
Plating Plated on both sides
Plating thickness 10u"
Pitch 1.6mm
Stamping Speed 300SPM
Dimension Tolerence +/-0.01mm

-High level of precision tooling processing, cutting oil required, PG, JG high- precision machining equipment.
- Product with two sets of dies, blanking completed in two steps.
- Product after punching the first surface, The first face punching products, in order to product efficiency , the need to strip after punching a specified area on both sides were plated ( film coated ), gold-plated and then bending forming , to prevent bending when the terminal is part abrasions, All punching and bending parts oil to be special treatment.

Company Profile:

Dongguan Huisoelec Limited excels at high-volume production of tight-tolerance precision metal stamping. Through proven manufacturing processes and industry-leading technology, we are able to create innovative solutions for your most complex component needs. Our precision stamping begins with high quality progressive dies.

All of our presses are equipped with electronic sensors, allowing us to run production consistently and safely at maximum speeds with minimum downtime.

Straight-sided presses ranging from 25 - 260 tons, imported from Taiwan and Japan, equipped with precision feeders, are capable of running speeds from 60 - 1500 spm. Dimension tolerence can be controled within +/-0.007mm, blanking thickness ranges from 0.04mm to 3.2mm; Piloting hole is φ0.08 min.

Yamada Dubby presses ranging up to 30 tons; ideal for coining difficult, tightly toleranced components in materials such as stainless steel, low-carbon steel, and copper alloys.  Parts may be ordered unplated, preplated, or postplated, packaged in bulk or on reels. Part quality strictly controled by our experienced QC staffs.

Not sure your products requirements? Directly send us all the information you know(CAD/3D drawing/Solid picture), the engineer team will provide the best solutions. Contact us now!

 

www.huisoelec.com

Glass Beverage Bottles

Glass Beverage Bottles,Beverage Juice Drinking Bottle,Glass Beverage Bottle,Glass Juice Bottles,Glass Milk Bottle

Wuxi Yogo Material Co.,Ltd , https://www.yogobottles.com