Drilling tool assembly (P, H, N and B) Core Barrel&Overshot,Core Barrel Overshot,Core Barrel For Geological,Core Barrel Of Diamond Core Driller JIANGSU XI TEC ENVIRONMENTAL&DRILLING EQUIPMENT COMPANY CO.LTD , https://www.sjxitecdrilling.com
                                   constant drains inline check double acting proportionals valve
NO.
Inle × Outle
connection
length(mm)
1
DN40×DN40
DN40flange
246
2
DN50×DN50
DN50flange
246
3
DN65×DN65
DN65flange
340
4
DN80×DN80
DN80flange
340
5
DN100×DN100
DN100flange
410
6
DN150×DN150
DN150flange
450
2 position 3 way Valve
inlet×outlet×drain (inch)
OD of inlet outlet pipe
OD of drain pipe
3×3×2
Victaulic 3"(90mm)
Victaulic 2"(63mm)
3×3×2.5
Victaulic 3"(90mm)
Victaulic 2.5"(75mm)
3×3×3
Victaulic 3"(90mm)
Victaulic 3"(90mm)
4×4×3
Victaulic 4"(114mm)
Victaulic 3"(89mm)
4×4×4
Victaulic 4"(114mm)
Victaulic 4"(114mm)
5×5×4
Victaulic 5"(140mm)
Victaulic 4"(114mm)
6×6×6
Victaulic 6"(165mm)
Victaulic 6"(165mm)
Product Description
water treatment diaphragm valves is lighter and rustless than those made of iron. It's added anti-aging to prevent aging after sunlight. And every valve have been pressure tested before shipment (15kg).
Below is the working process for its internal structure :
1. water treatment diaphragm valves can be used in sand filters, replacing two sets of electric or pneumatic valves, easy to be controlled;
2. PA6 (Nylon) material, max working pressure is 1.0MPa;
3. Clamp connection, easy installation and removal;
4. Never rust, corrosion resisting, can be used in weak acid environment;
5. Good aging resistance, can be used in the open air;
6. Switch quickly, good operation stability;
7. Easy to replace parts, low maintenance costs;
8. The diaphragm is made of advanced rubber material which has good elasticity, between rubber is the imported    high strength net cloth with good rebound performance;
9. With the bilateral dovetail waterproof rubber seal ring, it prevents water leakage of operation;
10. With the hold hoop on top, it's much safer and is convenient to change the parts inside;
11. External uses professional nylon paint treatment, excellent appearance.
FAQ
Shipping Ways:
1. By express: DHL, TNT, UPS, FEDEX, EMS etc, usually for small or regular and urgent orders
2. By sea transportation for bulk quantity
3. By air transportation.
Delivery time:
Shipping times are approximately 5-7 days for sample orders and 7-15 days for regular orders, after payment is done instantly by T/T, W.U. (weekends not included).
If we have any stock for your order, we will shipped out goods immediately on receipt of your payment.
Returns:
Situation 1
If no quality problem, there is no returns or refund. If there's any problem not caused by us, we are pleasure to fix it by sending some spare parts to you, and please bare the shipping cost.
Situation 2
For any quality problem caused by us, we provide refund for returns made within 15 business days of the delivery date. Or we fix it or make new ones for you as request.
Payment:
We accept TT payment(Bank Transfer), L/C, Western Union & Cash, etc..
Please remember to send us scaned recipt of T/T or other payment copy by Email, this will speed up the processing of your order.
Warranty
All our products have at least 1 year warranty. If there's any quality problems during the warranty period, we ship new spare parts for replacement free for you, or we accept return policy. Â Â
Relevant description of products:
Retrieve the inner tube with an overshot without lifting out the whole rods string to obtain the core, the wireline coring system lifts the underground core sample out of the borehole through the overshot to take back the entire inner tube and conduct sampling analysis. This improves productivity of the work site and guarantees safety of core sample during drilling down.
The system is realized through a fully independent inner tube. During its working, the inner tube does not connect with the overshot but locates at the bottom of the coring Drilling Rod directly (behind the coring drilling bit). An assembly device is installed on top of the inner tube, which includes coring and recycling functions. When the inner tube is full of core sample, the overshot is placed to the bottom from the borehole through a steel wire rope and lifted out by a winch. After the inner tube assembly is lifted to the surface, an empty inner tube is placed to the bottom of the hole to recover the drilling. This improves well drilling efficiency.
Our company provides core barrel assmeblies of different diameters to meet customers' demands. The wireline coring system is applicable for most drilling conditions and standard DCDMA hole sizes (B, N, H and P).
Currently, the company provides two models of wireline coring systems: double-tube and triple-tube
Core barrel assembly: It consists of inner tube and outer tube groups.
The inner part consists of the following parts: spearhead assemly, retrival components, core sample collection component, landing shoulder, stop ring and other parts.inner tube group, independent from outer tube group, collects core sample sample during well drilling.
The outer tube part consists of parts , which includes locking coupling, adapter coupling, outer tube, etc. The outer tube group that is kept at the bottom of the hole all the time holds the inner tube assembly during drilling.
The triple tube coring system AU3 has the same components as the dual-tube. And its interior has a third tube that is known as liner tube of the inner tube.
Liner tube of the inner tube is placed in the inner tube. The triple tube system can realize overall recovery ratio of core sample when drilling stratum with coal, clay or bigger crack. The liner tube or split tube keeps the core sample at its receiving status to collect or load and store easily.
Only N, H and P sizes are available for the triple tube coring system.
Constant Drains Inline Check Double Acting Proportionals Valve