Steel Coil Slitting Line/Slitter/Slitting Machine

Model NO.: HFSL
Recoil External Diameter: Max1800mm
Speed: 30-180m/Min
Slit Width: Min 25-30mm
Adapt Material: Cr Hr Gi Ss
Trademark: HuaFei
Transport Package: Plastic Film Cover or Plywood Case
Specification: according to work piece
Origin: Jinan
                      Steel coil slitting line machine for uncoiling slitting recoiling

********Thin plate slitting line (0.2-3mm)  
 
1.    This line is Used for steel plate coil to uncoiling, slitting, recoiling to required steel strips. This line apply to hot rolled carbon steel, tinplate, stainless steel and other different kinds of surface plated metal. 

2.  Slitting line is used for steel plate coil to uncoiling, slitting, recoiling to required steel strips. This line apply to hot rolled carbon steel, tinplate, stainless steel and other different kinds of surface plated metal.
   
3.   For the user with higher requirement, uncoiling with automatic edge aligning or centering is preferable, which has the advantage of easy entering coil, high working efficiency, improving cutting precision and protecting plate as well. EPC automatic edge control can be adopted as well, which can guarantee recoiling in tidiness, especially for the wider recoiling
   
4.    This line is composed of entry coil car, uncoiler, feeding in device, leveler, head shearing device, loop pit, side guide, slitting device, scrap winder, tension unit, recoiling machine, unloading device.etc.

5. Parameters
 
 Model No.
 Parameter		 Cutting thickness
 (mm)		 Cutting thickness
 (mm)		 Slitting quantity Width precise
 (mm)		 Coil weight
(T)
 		  
Slitting speed(mm/min)		 Remark
HFSL-2×400 0.2-2 100-400 20-5 ±0.05-0.1 5T 100 Technical data, configuration can according to customer requirement.
HFSL-2×800 0.2-2 100-800 30-5 ±0.05-0.1 8T 120
HFSL-2×1300 0.2-2 400-1300 30-5 ±0.05-0.1 8T 120
HFSL-2×1600 0.2-2 400-1600 40-5 ±0.05-0.15 10T 150
HFSL-3×1600 0.3-3 500-1600 40-5 ±0.1-0.2 15T 150
HFSL-3×1800 0.3-3 500-1800 40-5 ±0.1-0.2 15T 150
 

********Thick plate slitting line (4-12mm)

1.   Slitting line is used for steel plate coil to uncoiling, slitting, recoiling to required steel strips. This line apply to hot rolled carbon steel, tinplate, stainless steel and other different kinds of surface plated metal.

2.  Slitting line is used for middle and thick hot rolled steel plate coil to uncoiling,slitting, recoiling to required steel strips. This line apply to hot rolled carbon steel, thick aluminum coil, stainless steel and other different kinds of surface plated metal.
   
3.  Slitting line is composed of entry coil car, uncoiler, feeding in device, simple leveler, head shearing device, Side Guide, thick plate slitting device, scrap winder, tension unit, recoiling machine, unloading device.etc.
   
4.  This production line Hydraulic system main parts adopt Germany BOSCH-REXROT components and seals, electrical control adopt Japan Mitsubishi PLC program controller main motor of leveler and slitting device adopts high power DC motor, DC controller adopts ETD products, speed of uncoiler, slitting device and recoiling machine controlled by high-performance electric, able to achieve matched speed. This production line has high degree of automation, can process high strength thick plate, little amount of wrong side recoiling coil, has stable and reliable performance, easy operation and maintenance, etc

5.Parameters
 
 
Model No.
 
Parameter		 Cutting thickness
(mm)		 Coil width
(mm)		 Slitting quantity Width precise
(mm)		 Coil weight
(T)		 Slitting speed
(mm/min)		 Remark
HFSL-4×1600 1-4 500-1600 20-5 ±0.1-0.2 20T 40-60 Technical data, configuration can according to customer requirement.
HFSL-6×1600 1-6 500-1600 15-5 ±0.2-0.3 25T 30-50
HFSL-6×2000 1-6 500-2000 15-5 ±0.2-0.3 30T 30-50
HFSL-8×1600 2-8 500-1600 15-5 ±0.3-0.5 30T 20-30
HFSL-10×1600 2-10 500-1600 10-5 ±0.5-0.8 30T 15-20
HFSL-12×1600 3-12 500-1600 10-5 ±0.5-0.8 30T 15-20
 
********
Machine video link
https://www.facebook.com/AKZ250/videos/vb.100006914478186/1704692616437871/?type=3&theater
https://www.facebook.com/AKZ250/videos/vb.100006914478186/1704692063104593/?type=3&theater

*******
Service

Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
 
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.



 

cooling mold Chiller

The chiller is a cooling water equipment that can provide constant temperature, constant flow and constant pressure. The industrial water chiller can always output ice water that is lower than the ambient temperature. It can be used wherever cooling is needed, either directly or indirectly. The chiller can be used to cool the injection mold and improve the quality of plastic products; Vacuum coating cooling, control the temperature of vacuum coating machine; Food industry cooling, rapid cooling processing; Chemical industry, effectively control the temperature of chemicals; Building cooling, rapid cooling and condensation of concrete, etc. Water chillers are widely used.



Water chillers can be divided into industrial water chiller, screw water chiller, electroplating water chiller, oxidation water chiller, laser water chiller, coating water chiller, wave soldering water chiller, reflow soldering water chiller, exposure machine water chiller, developer water chiller, ultrasonic water chiller, extruder water chiller, high-frequency quenching water chiller, Injection Molding Machine water chiller, electrophoresis paint water chiller Pharmaceutical special water chiller, food special water chiller, stainless steel water chiller, circuit board water chiller, plastic suction machine special water chiller, chemical water chiller, coating water chiller. According to working conditions, it can also be divided into air-cooled water chiller, water-cooled water chiller, low-temperature water chiller, thermostatic water chiller, etc



Energy saving function of water chiller:



The water chiller is a kind of refrigeration equipment that cools water and recycles it. The cooling water temperature can be adjusted automatically according to the requirements, almost without water consumption. Long-term use can save a lot of water. Therefore, compared with the mode of using tap water discharge to cool the equipment, the industrial water chiller is an ideal equipment that can quickly achieve the desired cooling effect and save energy.



About the function of the chiller, I will introduce it here today. Chillers play an important role in industrial production. Enterprises use chillers to improve production efficiency, ensure product quality and increase profits.



1. Regularly check whether the voltage and electric flow of the water-cooled chiller are stable, and whether the compressor operates normally. If it is a semi-closed compressor, regularly check the oil volume, which should be more than 2/3 of the window. When the water-cooled chiller works normally, the voltage is 380V and the current is within the range of 11A-15A.





2. Regularly check whether the refrigerant of the water-cooled water chiller has leakage: it can be determined by referring to the parameters displayed on the high and low pressure gauge on the front panel of the host. According to the temperature change of air temperature (winter and summer), the pressure display of the water chiller is also different. When the water chiller works normally, the high pressure display is 11-17kg, and the low pressure display is 3.5kg-5kg, which are normal.



3. Check whether the cooling water system of the water-cooled water chiller is normal, whether the fan and sprinkling shaft of the cooling water tower are in good operation, and whether the make-up water of the built-in water tank of the water-cooled water chiller is normal. The water-cooled chiller should be replaced with new water once every three months. If it cannot be replaced, please add rust remover.



4. All industrial water chillers should be cleaned once a year when they are used for six months. The main cleaning parts include cooling water tower, cooling water pipe and condenser to ensure better cooling effect.



5. When the water-cooled chiller is not used for a long time, the circuit switches such as the main power supply of the water pump, compressor and Cooling Tower should be turned off in time. The water-cooled water chiller needs to be connected with the cooling water tower and the circulating water pump to achieve the cooling effect. In order to ensure the quality of the circulating water, it can be considered to install a Y-type filter at the water source and add algaecide and scale remover to the cooling water tower to prevent impurities from entering the pipeline and affecting the operation of the unit.

Cooling Mold Chiller,Injection Molding Chiller,Chiller Used In Injection Molding,Cooling Mold Chiller

Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachine.com