Wire Belt for Food Service Equipment

Model NO.: fxt01

Mesh: Wire Mesh

Wire Conveyor Belt: Mesh Belt

Metal Wire Mesh Belt: Wire Mesh Conveyor Belt

Trademark: leneng

Transport Package: Standard Wooden

Specification: 1.2mm, 1.5mm, 1.6mm, 1.8mm wire,

Origin: Yangzhou

HS Code: 73141200

wire belt Â are made of stainless steel wire of spring wire.Wire diameters varies from 0,9 until 3.2mm.Pitches from 4Â mm until 22.23mm, and belt widths from 10 mm until 3Â metre.We aÂ big range of standard dimensions, but can make all the (non standard) dimensions too because of the multi adjustable production machinery.Belts executed with single loop (most common) or double looped edges for special occasions.
Flat flex belts can be made for straight conveyors and for curve conveyors.

Flat flex belts are normally driven by toothed sprockets, made of (stainless) steel or plastic.The number of teeth is free to choose and can be made for every new or existing conveyor.

This belts are often used in conveyors for the food industry for the production of:
-snacksÂ Â Â Â Â Â Â Â Â Â Â Â -fishÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â -pizzasÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â -vegetablesÂ Â Â Â Â Â Â Â Â Â Â Â -bread
-pastryÂ Â Â Â Â Â Â Â Â Â Â Â -meatÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â -candyÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â - (small) potatoes
-biscuitsÂ Â Â Â Â Â Â Â Â Â -chocolateÂ Â Â Â Â Â Â Â Â Â Â Â Â -nuts and fruits

Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â sizeÂ material typle space *section rod ptich(mm) wireÂ dia price(usd)

length20m xwid0.613m ss304 wings(4.5mm*2) 67*9 10 1.6 27/meter

length20m x width0.613mm ss304 wings(9.5mm*2) 85*7 14.5 2.5 28/meter

length20m xwid0.214mm ss304 wing5.5mm 66.5*3 9.5 1.6 18/ meter

Light Duty Spinning
The principle of metal spinning process is to cover the processed metal blank (tube blank) on the mandrel, while the blank is pressed at the end of the mandrel by the tail, and rotates with the mandrel along the spindle, and the rotary wheel moves along the mandrel.
Generally speaking, light automatic spinning machines have structural advantages similar to ordinary lathes. However, in order to meet the requirements of the above spinning process, large spinning machines usually have the following 11 core advantages.
1. The automatic spinning machine bed, main shaft, and transmission system, rotating wheel frame, tailstock and other parts should have sufficient rigidity, and also have a heavier worktable, a thicker guide rail, and a thick wall bearing support And cabinets.
2. The horizontal and longitudinal feed mechanisms of the rotary frame are mostly driven by hydraulic transmission or a combination of mechanical and hydraulic pressure to generate sufficient spinning pressure and balance step-less speed regulation to meet process requirements.
3. Ordinary automatic spinning machines usually use one rotary wheel, but there are multiple auxiliary forming wheels (flanging wheel, curling wheel, etc.). The number of rotating wheels or rotating frame of the powerful automatic spinning machine is 2 to 3 (the general type is 2, and the cylindrical part spinning machine is mostly 2 to 3), and is symmetrical to the spindle axis. Balancing the radial force during spinning, reducing the bending deflection, deflection, and vibration of the spindle and core mold provides a prerequisite for improving the accuracy of spinning parts. This correspondingly requires the rotary wheel to have a higher horizontal (such as a special spinning machine for cylindrical parts) or a longitudinal (such as a general-purpose automatic spinning machine) synchronous feed accuracy. However, a rotary wheel is used for the light and powerful automatic spinning machine.
4. The main shaft has sufficient transmission torque and power. According to the specific process requirements, it can meet the constant torque or constant power adjustment. In addition, it is best to make the spindle speed and the longitudinal feed speed of the rotary wheel steplessly adjustable. On the one hand, it can meet the arbitrary selection requirements of the spinning process; on the other hand, it can maintain the surface rotation speed of the core mold during the spinning process. Possibility of constant feed per revolution.
Light Duty Spinning,Light Duty Spinning Machine,Spinning Lathe,Cnc Spinning Machine
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.hostoncncs.com