NGC is the "China Sea Supervisor 52" supporting adjustable paddle propulsion system

Nanjing Gaojing Marine Equipment Co., Ltd., a subsidiary of NGC Marine Group, participated in the bidding for the project due to its experience in building and renovating scientific research vessels and official ship propulsion systems. After many times of communication and exchange with shipowners and design institutes, the project design was completed. The design scheme fully considers the installation and commissioning of the main propulsion device; the design of the propeller matching in the scheme can meet the ship's speed performance requirements; at the same time, the equipment is fully ensured through the integration of the main propulsion system and the imported control system. Safety and reliability. The NGC design plan was finally approved by all parties to obtain the transformation order for the main propulsion equipment of the project.


"China Sea Supervisor 52 " has been 40 years old, the original structure is relatively backward and most of the supporting equipment needs to be replaced. The existing work has a large workload, difficult to support, high complexity and need to meet the crew's many years of manipulation habits.


The ship carried out the main propulsion system performance test during the sea trial, exceeding the design speed of 1knot at 85% MCR power, exceeding the design requirements, and the shipowner gave a high evaluation.

Through the implementation of this special ship type transformation project, NGC completed the design, production, installation and commissioning of its propulsion system transformation, and accumulated a large number of technologies and experience in propulsion system transformation.

Plate Type Heater

Made of a new type of corrosion resistant electric heater, used for all kinds of corrosive liquid heating.It has good aging resistance and good winding performance. It adopts low surface load design.The outer layer of the stainless steel or shape heating tube is covered with a fluoroplastic sleeve. The power requirement should be controlled below 1.5w /cm2, preferably not exceeding 2W/cm squared.

Ptfe Sheathed Immersion Heater Jacket,Teflon Heater,PTFE

Guangzhou Quanxu Technology Co Ltd , https://www.inkjetcoating.com