Mobile Scissor Lift:
Hydraulic Vertical Aerial Work Platform is made of high quality steel. The Scissor Lift Table is single-phase 220v AC power or three-phase 380v AC power.
Elevating Work Platform control has two ways: manual pump which is equiped for the use in case power is cut off and electric.
Mobile scissor lift heights: ranging from 4m, 6m, 8m, 10m, 12m, 14m.
Mobile Scissor Lift Specification Table:
MODEL
PLATFORM SIZE
(mm)
LIFT CAPACITY
(kg)
LIFT HEIGHT
(m)
OVERALL SIZE
(mm)
WEIGHT
(kg)
SJY0.5-4
2100*830
500
4
2250*950*1100
800
SJY0.5-6
2100*830
500
6
2250*950*1200
880
SJY0.5-7
2100*830
500
6.8
2250*950*1280
970
SJY0.5-8
2100*930
500
8
2250*1060*1380
1050
SJY0.5-9
2100*930
500
9
2250*1060*1500
1165
SJY0.5-10
2100*1230
500
10
2250*1350*1530
1360
SJY0.5-11
2100*1230
500
11
2250*1350*1650
1400
SJY0.5-12
2550*1530
500
12
2796*1670*1750
2260
SJY0.5-14
2812*1530
500
14
3067*1730*1810
2486
SJY0.5-16
2812*1600
500
16
3067*1810*2080
3063
SJY0.5-18
3070*1600
500
18
3321*1810*2080
3900
MODEL
PLATFORM SIZE
(mm)
LIFT CAPACITY
(kg)
LIFT HEIGHT
(m)
OVERALL SIZE
(mm)
WEIGHT
(kg)
SJY1.0-4
2100*1200
1000
4
2250*1350*1180
1250
SJY1.0-6
2100*1200
1000
6
2250*1350*1300
1400
SJY1.0-8
2100*1200
1000
8
2250*1350*1420
1585
SJY1.0-10
2100*1200
1000
10
2250*1350*1530
1700
SJY1.0-12
2550*1530
1000
12
2796*1670*1750
2560
SJY1.0-14
2812*1600
1000
14
3067*1810*1900
3230
MODEL
PLATFORM SIZE
(mm)
LIFT CAPACITY
(kg)
LIFT HEIGHT
(m)
OVERALL SIZE
(mm)
WEIGHT
(kg)
SJY1.5-6
2100*1530
1500
6
2250*1750*1530
1780
SJY1.5-8
2100*1530
1500
8
2250*1750*1690
2070
SJY1.5-10
2100*1530
1500
10
2250*1750*1850
2250
SJY1.5-12
2550*1530
1500
12
2796*1762*1850
2900
SJY1.5-14
2816*1600
1500
14
3045*1852*1960
3400
MODEL
PLATFORM SIZE
(mm)
LIFT CAPACITY
(kg)
LIFT HEIGHT
(m)
OVERALL SIZE
(mm)
WEIGHT
(kg)
SJY2.0-6
2100*1530
2000
6
2250*1750*1530
1780
SJY2.0-8
2100*1530
2000
8
2250*1750*1690
2070
SJY2.0-10
2100*1530
2000
10
2250*1750*1850
2250
SJY2.0-12
2550*1600
2000
12
2796*1852*1954
3200
SJY2.0-14
2816*1600
2000
14
3067*1852*2230
3900
MODEL
PLATFORM SIZE
(mm)
LIFT CAPACITY
(kg)
LIFT HEIGHT
(m)
OVERALL SIZE
(mm)
WEIGHT
(kg)
GTJY05A
1.15×0.7m
240
3
1.3*0.76*1.95
545
GTJY05
1.28×0.7m
240
3
1.44*0.76*1.83
535
GTJY06
1.28×0.7m
240
4
1.44*0.76*1.95
590
Application Area:
Height Electric Mini Scissor Lift is an equipment used widely in aerial work, such as granary, bus station, railway station, airport. Hydraulic Lift Table can used in gas station and aerial pipeline for the equipments installations and maintenance.
If you have any questions, please contact with us directly. Mobile Scissor Lift are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.
Mobile Scissor Lift,Automotive Scissor Lift,Small Scissor Lift,Portable Scissor Lift Jinan East Machinery Co.,Ltd. , https://www.jneastmach.com
The coaxial submersible pump is the impeller of the submersible pump directly mounted on the shaft extension end of the motor and integrated with the pump. Its characteristics are compact structure, convenient installation, no pump room, small footprint, long-distance control operation, safety and reliability, simple maintenance, and short and thick submersible pumps. Can be used for drainage rescue, surface drain drainage, urban drainage, agricultural drainage and irrigation.
Conditions of Use
1. The motor must be filled with clean water or other formulated aqueous solutions.
2. The submersible pump should completely submerge in water.
3. The water temperature is not higher than 20°C.
4. The solid impurity content in water does not exceed 0.01%.
5. The water does not contain chemically corrosive substances and the pH is between 6.5-8.5.
System components: The coaxial submersible pump consists of submersible motors, submersible pumps, power cables, signal cables, joint materials, gate valves, check valves, and elbows.
Submersible motor: It is a water-filled wet seal structure. It is generally a vertical installation.
1. According to the use situation, some cases have radiating ribs and water channels, and are equipped with suction caps to facilitate electrode cooling.
2. The bottom of the motor is equipped with elastic capsules, which can automatically adjust and balance the pressure inside and outside the motor.
3. The motor adopts the mechanical seal box rubber oil seal, and the rubber and “O†ring and sealant are used on the matching surface of the mouth, which has good sealing performance.
4. The motor guide bearing and thrust bearing are all made of high-quality, high-strength, wear-resistant materials. They have good wear resistance and high axial load.
Submersible pumps: Most of them are single-stage impellers, and they are installed directly on the deep extremity of the motor shaft. The impeller and the guide shell are made of high-strength cast iron that can resist wear. Alloys or coated wear-resistant materials can also be used according to different requirements.
Control cabinet: Short circuit, overload protection, voltage protection and water level monitoring device and temperature protection device can be installed as required.
Cable: Use waterproof three-core rubber flexible cable, its length is 5 meters or as required.
How to use the coaxial submersible pump?