As the saying goes, often go by the river, where there is not wet shoes. Driving on the road for a long time, will inevitably encounter a puncture, or tires are tied up, changing the spare tire is definitely not an easy thing for the novice, for many old drivers, they are not necessarily will, originally Can it take 20 minutes to complete the work and seek rescue? Is it not a waste of time? Today Xiaobian uses thirty seconds to teach you how to change your spare tire! Preparation steps First you have to prepare a few things, spare tires, triangle cards, screw wrenches, jacks. The role of the triangular sign is needless to say. When changing the spare tire, it should be placed 50-100 meters behind the car and 200 meters on the high speed to ensure safety. The rest will be tire changing tools. Remove broken tires Don't put the jack up first, be sure to loosen the screw first with a screw wrench (is loosening, not unloading). When loosening the screw, take the method of loosening diagonally one by one, because it is not Will make screws, tires, hubs deformed. Note: In general, counterclockwise is to loosen the screw, clockwise is tightened, the screw is generally tight, a little harder to release, remember! The next step is to use jacks. The jacks all have support positions. Generally, the jacks are in the middle of the vehicle. The vehicles will be marked, usually 10-15 cm away from the tires, as shown in the following figure: When lifting the body, the speed should not be too fast, to avoid falling and other situations, the body should not rise too high, can remove the tire can be too high, but will cause the installation and other adverse effects. Install spare tire When installing the spare tire, the most difficult step is how to align and fix the spare tire with the screw holes. A good way to tell you is to use your hands or feet against your tires. It may be a little better. Also, don't screw up all the screws and wait until all are confirmed. Then tighten the screws. Friendship Tip: The spare tire can only solve the urgent need, can not be used for a long time, as soon as the tire repaired, pay attention to traffic safety. Brass turning is to fix the blank, use a high-speed rotating cutter to cut the blank, cut out the required shape and features, CNC turning machine can process complex shapes and features. Brass turning is a turning cutter that is suitable for machining planes, grooves, various forming surfaces and special shapes of the mold. Brass is the most popular material requested by our customers. Service Brass Parts,Cnc Turning Service Machining,Brass Cnc Turning Service Chongqing Jin Te Rui Machine Co.,Ltd , https://www.cncjtr.com
As long as 30 seconds, you can teach you to change your tires