When using LED advertising vehicles, it is inevitable that some malfunctions of LED advertising vehicles will occur due to certain non-human and thought factors. However, in the event of a malfunction, how should we solve it? ? If the vehicle is on the way of advertising, how can the engine suddenly start? If you do not understand the situation at this time, go to the telephone repair shop to find someone to repair, not only a lot of time wasted, there may be no LED advertising car simply failed, but also because the driver Some of the erroneous operations caused. Therefore, in order to save more time and money, you still need to master some simple troubleshooting and maintenance skills. If the LED advertising car engine can not start, the first step is to check the spark plug to see if the vehicle spark plug is not damaged. If there is such a situation, the damaged spark plugs need to be replaced immediately. Under normal circumstances, the LED spark plugs are between 20,000 to 30,000 kilometers in driving mileage. Then check in sequence whether the voltage of the battery of the next vehicle is within the normal range. Most of the batteries are now designed with observation holes for checking the voltage. When it is green, it means that it can be used normally. If there is a black color, it will prove to be maintenance or a supplementary point. If it is white, it is necessary to replace the LED advertising car battery. If it is a long-term driving LED advertising vehicle does not turn off the lights, it is possible to exhaust the power, if it is because of such bad operation, then turn the ignition switch to the ON position, Then hang the LED advertising car to the second gear position, step on the clutch and drag the car. When driving to a fixed speed, the clutch will be released and the LED advertising vehicle will be able to start. However, this method of starting is also suitable for simple faults that are not adequate for power. If the vehicle is in the event of a fault in the ignition system, this method will not work, and it may even be a three-way catalyst for vehicles. It plays a role in damage, as well as damage to the belt and engine when the timing is down. In the worst case, it will cause mechanical failure. If the LED advertising vehicle is equipped with an automatic transmission, it is not possible to use the vehicle to start the engine. A battery connected to another vehicle with a jumper cable can be used to start the engine. It is really unable to find the cause of the failure. It can only be to find the LED advertising vehicle dealers or manufacturers of after-sales.
Grinding Glass Microsphere
5. To add new glass beads to ensure the quality and efficiency of grinded materials.
Grinding glass beads are mainly used for the disperser, grinding media of industries, such as coloring, paint, ink, coatings, resins, chemical engineering, with the advantages of smooth surface, even size, high hardness, good chemical stability. Thanks to the characteristics of heat-resistant, wearable, compression strength, the filling-type bead could be used to improve glass fibre reinforced plastic, rubber, and so on.
Grinding Glass Beads,Grinding Glass Beads Borosilicate,Grinding Glass Beads Road Marking,Gj-I Grinding Glass Beads CHIYE GLASS BEAD (HEBEI) CO., LTD , https://www.chiyeglassbeads.com
1. To select glass beads in types, sizes and quantity in accordance with viscosity, rigidity and dispersal of the grinded materials.
2. To clean glass beads and mill's inside before the grinding processed.
3. To input the grinded materials firstly and a curtain amount of glass beads later. To add continuously glass beads till 70%~80% of the mill is full.
4. To forbid to keep glass beads funning with little grinded material for a long time, as the glass beads inside the mill are easily broken at high speed operation.
The glass bead can be produced based on the standard of countries or areas, such as EN1423/1424, AASHTO M247, BS6088, JIS R3301 and KS L2521 etc.
Led advertising car safe use knowledge
Product Description