The entire working system of the engine is an energy conversion mechanism. That is, the heat energy of gasoline (diesel) is pushed into the mechanical energy by pushing the piston to work when it expands in the sealed cylinder. As an important part of the car, the engine provides the driving force for the car. The water-cooled engine is one of the truck engines. What happens if the oil pan is flooded during long-term operation? The reason is that the oil cooler damage causes the engine water The oil cooler is contained in the water cavity of the machine body. If the added cooling liquid does not meet the standard, it will cause great corrosion to the cooler and even cause the cooler to have rust. Because of the good fluidity of the water, the water outside the cooler penetrates into the internal oil and eventually flows into the oil sump. However, in normal use, the oil cooler is not easily damaged and the quality is very good, so this reason is often easily overlooked. Cause two: There is a crack in the cylinder block or cylinder head During normal use, the cylinder or cylinder head generally does not crack, and cracks are mostly caused by human factors. If the temperature drops, the engine is not drained in time after the work is completed, or when the engine body temperature is too high, water is splashed onto the engine body. These are likely to cause cracks in the engine block or cylinder head, resulting in water channel and oil channel intercommunication. Three reasons, cylinder liner seal damage Engine cylinder liners and piston rings are a pair of friction pairs that operate under high temperature, high pressure, alternating loads, and corrosion. The long-term work in the complex and changing conditions, the result is that the cylinder liner wear and deformation, affecting the engine's power, economy and service life. If the cylinder sleeve is installed incorrectly, it will directly cause the seal ring to be squeezed and deformed or even be damaged, and finally cause the water in the cylinder body to enter the oil pan directly along the outer wall of the cylinder sleeve. Editor's Note: The engine is a relatively complex part of the truck. When the oil pan is found in the water, it must be looked for in many ways. Start with simple aspects and find the hard part. According to specific issues, make correct judgments and analysis. SXMXS Composite Nonwoven Line Series
Yangzhou Yuyang Nonwoven Machinery Co., Ltd
has over 20 years` experience of designing, manufacturing, installing and
debugging nonwoven fabric making machine series. In early 20 centuries, our
company took part in designing and manufacturing SMXMS nonwoven fabric
production lines. In terms of studying foreign advanced technology and
analyzing the actual situations inChina, china nonwoven machine
development team includes Yuyang machinery developed SMXMS nonwoven machine by
ourselves. The X of SMXMS composite nonwoven fabric product line can be either
melt-blown die or spun bonded die based on requirement of customer(SMMMS Nonwoven Machine or SMMSS Nonwoven Machine). The product
of SMXMS nonwoven machine has the advantages of high intensity, high
filterability, great breathability, etc.
SMMMS Nonwoven Machine,SMMSS Nonwoven Machine,SXMXS Composite Nonwoven Machine,Five Die Nonwoven Machine,PP Nonwoven Machine Yangzhou Yuyang Nonwoven Machinery Co., Ltd , https://www.yy-machinery.com
扒一扒: Reasons for water inlet of water-cooled engine oil pan