Full Automatic Tire Oil Recycling Equipment

Model NO.: ZSA-10
Base Oil Recovery Rate: 85%~88 %
Condition: No Need Acid and Clay
After-Sales Service Provided: Engineers Available to Service Overseas
Trademark: junneng
Transport Package: Buck Packing
Specification: ZSA-10
Origin: Chongqing
HS Code: 8421299090
Model NO.: ZSA-10
Base Oil Recovery Rate: 85%~88 %
Condition: No Need Acid and Clay
After-Sales Service Provided: Engineers Available to Service Overseas
Trademark: junneng
Transport Package: Buck Packing
Specification: ZSA-10
Origin: Chongqing
HS Code: 8421299090
Full Automatic Tire Oil Recycling equipment


 
 1.overview 
This machine can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through vacuum distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production.

Full Automatic Tire Oil Recycling Equipment



2.process description 

Full Automatic Tire Oil Recycling Equipment


3.Systems of equipment
1)Pretreatment systems:Waste oil will be pumped into the distillation kettle after pretreated.

2)Distillation systems: through burning gas, coal or fuel oil to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system.

3)Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel.

4)Oil storage systems: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank.

5)Vacuum systems: meet the technology requirement.

6)Filtration systems: rapidly filter out mechanical impurities in the base oil, gasoline and diesel; get the high quality base oil, gasoline and diesel.



4.Recovery rate
Base oil: 85%~88 %( index same as SN150~SN200)
Gasoline: about 3%     Diesel: about 3%-4%     Oil residue: 6%~8%        
 
 Full Automatic Tire Oil Recycling Equipment



5.Index of oil after treatment
 
No Item Unit Technical data
Light  base oil Medium/heavy base oil
1 Viscosity(40ºC) mm2/s 16~32 28~72
2 Viscosity index   ≥99 110
3 Appearance   Transparency Transparency
4 Color index ASTMD1500 ≤1.2 ≤1.6
5 Pour point ºC -15 -10
6 Water content %W/W ≤0.05 ≤0.05
7 Flash point open ºC ≥180 ≥210
8 Ash content %W/W 0.005 0.005
9 Carbon residue %W/W ≤0.13 ≤0.13
10 Corrosioncopper,100ºC3h Qualified Qualified
11 Acidity mgKOH/g ≤0.05 ≤0.05



6.performance characteristics,advantage introduction
1 widely usage: can treat gasoline engine oil, diesel engine oil, waste oils and other various cleaning oil

2 low processing costs: the total cost of processing one ton used oil only USD30 (including fuel, electricity and pretreatment agent)

3 high recovery rate: base oil: 85%~88%, gasoline 3%, diesel: 3%~4%, oil residue: 6%~8%
Current the continuous operation practices in the market, while the good oil come out, at the same time pump waste oil in. This operation is complicated, labor-intensive, and a lot of good oil will be pumped as   residue oil, the yield at most up to 72%, too much residue oil.

4 Do not need acid and clay, get high quality base oil : No unsaturated composition, can storage in a long-term without change its color, also no any bad smell.

5 environmental protection: the whole process is all sealed, won't release any gas harmful to human and environment, the colloid and asphalting, carbon black in the waste lube oil are all into sludge, can be used as asphalt or fuel.

6 this machine use a special way heating, high thermal efficiency, and difficult to form carbon fouling.safe, reliable, durable.this is the most advanced technology in the world and suitable for large-scale industrial production.

7 easy operations, low labor intensity, only 1 to 2 workers can easily operate the machine.


7.FAQ

1 what kind of raw material the ZSA machine can treat
ZSA machine can treat all kinds of waste lubricant oil,motor oil,car engine oil.these kind of oil can be mixed.

2 what kind of final product we can get
main product is base oil,a little gasoline and diesel

3 how about the oil yield of  ZSA Used Lubricant Oil recycling plant Recycle Black Oil To Base Oil

in normal industrial production,can get at least 85% base oil.this can be assured


4 how to heat the ZSA machine
can use fuel oil or gas to heat,environmental friendly,don't suggest use coal.not good for environment


5 need any other special chemical in the processing
just need the pretreatment chemical.this chemical customer can buy from local market.don't need other chemical.don't need acid and clay.


6 what kind of equipment need customer prepare?

customer just prepare the good oil and waste oil tanks,a water pool and power supply


7 how about the guarantee

5Year Guarantee for main parts,1 Year for mechanical and electrical products. any question of the plant will reply in 24 hours!


8 about how long can deliver the machine

according to different capacity,usually 30~50 working days can deliver the machine


8. if this product can't meet your need,we also have other series.

Full Automatic Tire Oil Recycling Equipment


9.contact information

Full Automatic Tire Oil Recycling Equipment
 

Full Automatic Tire Oil Recycling equipment


 
 1.overview 
This machine can treat a variety of waste lube oil, to get high quality base oil and a small amount of gasoline and diesel through vacuum distillation. After pretreatment, waste oil pumping into the distillation kettle, and heating to working temperature, we will can get the base oil, gasoline and diesel .When reaction completed, stop heating, remove residue from the bottom of the tank, then the machine can be used again. The production is economical, however, the base oil is excellent .This is the most advanced technology in the world in the waste oil recycling field, and it is suitable for large-scale industrial production.

Full Automatic Tire Oil Recycling Equipment



2.process description 

Full Automatic Tire Oil Recycling Equipment


3.Systems of equipment
1)Pretreatment systems:Waste oil will be pumped into the distillation kettle after pretreated.

2)Distillation systems: through burning gas, coal or fuel oil to make the oil in the kettle up to the working temperature. This system equipped with stirring system and insulation system.

3)Cooling system: the gaseous hydrocarbon will be cooled into liquid base oil. Gasoline and diesel.

4)Oil storage systems: the base oil, gasoline and diesel get from cooling system storage here, and then pump into the storage tank.

5)Vacuum systems: meet the technology requirement.

6)Filtration systems: rapidly filter out mechanical impurities in the base oil, gasoline and diesel; get the high quality base oil, gasoline and diesel.



4.Recovery rate
Base oil: 85%~88 %( index same as SN150~SN200)
Gasoline: about 3%     Diesel: about 3%-4%     Oil residue: 6%~8%        
 
 Full Automatic Tire Oil Recycling Equipment



5.Index of oil after treatment
 
No Item Unit Technical data
Light  base oil Medium/heavy base oil
1 Viscosity(40ºC) mm2/s 16~32 28~72
2 Viscosity index   ≥99 110
3 Appearance   Transparency Transparency
4 Color index ASTMD1500 ≤1.2 ≤1.6
5 Pour point ºC -15 -10
6 Water content %W/W ≤0.05 ≤0.05
7 Flash point open ºC ≥180 ≥210
8 Ash content %W/W 0.005 0.005
9 Carbon residue %W/W ≤0.13 ≤0.13
10 Corrosioncopper,100ºC3h Qualified Qualified
11 Acidity mgKOH/g ≤0.05 ≤0.05



6.performance characteristics,advantage introduction
1 widely usage: can treat gasoline engine oil, diesel engine oil, waste oils and other various cleaning oil

2 low processing costs: the total cost of processing one ton used oil only USD30 (including fuel, electricity and pretreatment agent)

3 high recovery rate: base oil: 85%~88%, gasoline 3%, diesel: 3%~4%, oil residue: 6%~8%
Current the continuous operation practices in the market, while the good oil come out, at the same time pump waste oil in. This operation is complicated, labor-intensive, and a lot of good oil will be pumped as   residue oil, the yield at most up to 72%, too much residue oil.

4 Do not need acid and clay, get high quality base oil : No unsaturated composition, can storage in a long-term without change its color, also no any bad smell.

5 environmental protection: the whole process is all sealed, won't release any gas harmful to human and environment, the colloid and asphalting, carbon black in the waste lube oil are all into sludge, can be used as asphalt or fuel.

Copper products

Metal Spinning Copper Products,we have sing bowl,horn and so on. We also can make incense burner.And we can make it if you send us the design drawings.

Copper processing Metal copper cover plate Water bowl

Shaoxing Hui Da Metal Products Factory , https://www.syhdmetals.com