Auto Ignition Coil, Ignition, Modern Series Car OEM: 27301-26640

Model NO.: 27301-26640
Trademark: cosonyoo
Transport Package: Box
Specification: 20*8.5*3.5/pcs 200g
Origin: China
Introduction:
Processing custom: otherwise
Application of Engine Cylinder Number: 4 cylinders
Applicable models: modern Elantra, Cerato, new Yuet, Lang move, Rena, accent, KIA K2/K5 Tucson use of 1.6VVT: gasoline two uses.
Brand: Corson Yao/cosonyoo
Product Model: 27301-26640.
Production: China.

If the ignition coil is improperly used, it can cause damage to the ignition coil: prevent ignition coil to be heated or damp; the engine does not run when the ignition switch is not running; regularly check, clean, tighten line joints, avoid short-circuit or iron; control Engine Performance, Prevent Voltage too high; spark plug can not long "hang fire "; the water on the ignition coil can only be dried with cloth, and it must not be baked with fire, otherwise it will damage the ignition coil.
Auto Ignition Coil, Ignition, Modern Series Car OEM: 27301-26640

Auto Ignition Coil, Ignition, Modern Series Car OEM: 27301-26640
Auto Ignition Coil, Ignition, Modern Series Car OEM: 27301-26640
Auto Ignition Coil, Ignition, Modern Series Car OEM: 27301-26640
Auto Ignition Coil, Ignition, Modern Series Car OEM: 27301-26640
Auto Ignition Coil, Ignition, Modern Series Car OEM: 27301-26640

 Modern series:
 ignition coil 27301-04000
 ignition coil 27301-22600
 ignition coil 27301-23400
 ignition coil 27301-23700
 ignition coil 27301-26600
 ignition coil 27301-26640
 ignition coil 27301-2B000
 ignition coil 27301-2B010
 ignition coil 27301-2E100
 ignition coil 27301-37120
 ignition coil 27301-38020
 ignition coil 27301-3C000
 ignition coil 27301-3E100
 ignition coil 27301-3E400
 ignition coil 27301-3F100
 ignition coil  
 ignition coil  

 

Metal Gasket

Metal Gasket Products Features
Wide range of applicable working condition,high temperature and high pressure resistance,applicable to super low temperature and vacuum condition.Chemical resistant gasket is available under various medium,through change of composition of gasket.
Strong stress compensation,stable and reliable sealing performance even under frequent pressure fluctuation condition.
Perfect sealing performance.
Normal requirement of flange surface finishing which contact with gasket.
Easy installation and low pre-tightening stress of gasket.

Technique
Using photo etching not laser cut or stamping. By photo etching, the edges of the springs is smooth without any burr. By stamping, the mold cost is high and the thin products will be out of shape easily, but photo etching will keet the thin products flat enough.

Chemical Resistant Gasket,Metal Gasket With Flange,Flat Ring Metal Gasket,0.02Mm Thickness Metal Gasket

Yangzhou Tongyang Chemical Equipment Co., Ltd. , https://www.tyceqt.com