One of the biggest features of forging is that it can change the metal structure and improve the mechanical properties of the metal. Therefore, generally forged parts are used on parts with relatively high strength and toughness requirements or severe working conditions. The stainless steel forgings can be used in some places with high rust and corrosion resistance requirements or particularly harsh working environments. Due to the characteristics of the forging process, forging is not suitable for machining workpieces with particularly complex shapes, and for some places with fine holes or fine grooves, forging cannot be achieved, but it can be achieved by subsequent precision CNC machining.
Due to the characteristics of the forging process, the forging processing is often matched with the subsequent secondary precision CNC processing. SCZY has independent mold design and production, forging processing and precision CNC machining departments, which can be well coordinated to achieve the best results.
Stainless Steel Forgings,Stainless Steel Forging Parts,Stainless Steel Forged,High Stainless Steel Brass Hot Forging,Stainless Steel Forging Process Shenzhen SCZY Technology Co.,Ltd , https://www.szsczycasting.com
1. Close the inlet and outlet pump cover, open the drain plug and bleed plug, the water and gas discharge;
2. Loosen the fasteners between the pump coupling and the motor coupling;
3. Loosen and squeeze the packing cap;
4. Loosen the connecting bolt between the pump cover and the pump body and remove the pump cover.
5. Loosen the connection bolt between the bearing body and the pump break, remove the rotor part;
6. Remove pump coupling and bearing gland:
7. Loosen the nut and press out the bearing body from the shaft. The bearing body includes the bearing to ensure even pressure, not to use the hammer, otherwise the bearing will be damaged.
8. Disassemble packing, packing ring and bushing and loosen shaft nut. Remove the sleeve. The impeller and the shaft are gap fit, so the impeller can be removed relatively easily. If you can not split, beat the wheel with a wooden hammer. 
KS single-stage double-suction centrifugal pump in the open demolition
As long as the pump cover is disassembled, the entire rotor part can be disassembled without having to disassemble the inlet and outlet pipes;