Wet Foam,Wet Foam For Flowers,Florists Foam,Wet Foam Brick SHANGHAI WELLONG IMPORT AND EXPORT CO., LTD , https://www.woranfloralfoam.com
A rain gutter or down spout is a narrow channel, or trough, forming the component of a roof system which collects and diverts rainwater shed by the roof. Down spout roll forming machine is the essential for its production.
Â
Roller Stations
About 24 Steps
Coil Thickness
0.3 - 0.8 mm
Tolerance
3m ± 1.5 mm
Line SpeedÂ
12 - 15 m/min
Electical Contral
PLC(Panasonic, Siemens, Yaskawa)
Power
380V, 50Hz, 3Phase
TECHNICAL SPECIFICATION
1. Roller stations: about 24 steps
2. Material of roller: Gcr15, heat treatment HRC 58-62, chrome coating
3. Main speed: 12 - 15m/min
4. Main motor power: 7.5kw
5. Diameter of roller: Ф70
6. Transmission type: chain drive, housing frame
7. Stop to cut, Post cut, Cutting tool material: Cr12, Heat treatment, Hardness: HRC 58°-60°
8. Hydraulic oil pump motor: 5.5kw
9. The pressure of hydraulic: 12Mpa
10. The material of the cutter: Cr12
11. PLC Control System: Panasonic, Siemens
12. Computer control system, Omron PLC control length, encoder: Omron
13. Dimension (L*W*H):17000mm*1200mm*1400mm
Packing & Delivery
Not only the Good Machine, but also the Most Attentive Service
Integrity Solution & Turnkey Project
Creat the Value of Steel
A rain gutter or down spout is a narrow channel, or trough, forming the component of a roof system which collects and diverts rainwater shed by the roof. Down spout roll forming machine is the essential for its production.
Â
Roller Stations
About 24 Steps
Coil Thickness
0.3 - 0.8 mm
Tolerance
3m ± 1.5 mm
Line SpeedÂ
12 - 15 m/min
Electical Contral
PLC(Panasonic, Siemens, Yaskawa)
Power
380V, 50Hz, 3Phase
TECHNICAL SPECIFICATION
1. Roller stations: about 24 steps
2. Material of roller: Gcr15, heat treatment HRC 58-62, chrome coating
3. Main speed: 12 - 15m/min
4. Main motor power: 7.5kw
5. Diameter of roller: Ф70
6. Transmission type: chain drive, housing frame
7. Stop to cut, Post cut, Cutting tool material: Cr12, Heat treatment, Hardness: HRC 58°-60°
8. Hydraulic oil pump motor: 5.5kw
9. The pressure of hydraulic: 12Mpa
10. The material of the cutter: Cr12
11. PLC Control System: Panasonic, Siemens
12. Computer control system, Omron PLC control length, encoder: Omron
13. Dimension (L*W*H):17000mm*1200mm*1400mm
Packing & Delivery
Not only the Good Machine, but also the Most Attentive Service
Integrity Solution & Turnkey Project
Creat the Value of Steel
Downspout Pipe Roll Forming Machine
Roller Stations: About 24 Steps
Coil Thickness: 0.3 - 0.8 mm
Line Speed: 12 - 15 M/Min
Trademark: TGMCO
Transport Package: Wood Box
Origin: China
Roller Stations: About 24 Steps
Coil Thickness: 0.3 - 0.8 mm
Line Speed: 12 - 15 M/Min
Trademark: TGMCO
Transport Package: Wood Box
Origin: China